Ps4 Controller X Button Not Working

Is your Ps4 Controller X Button Not Working and giving you trouble? No worries, young gamers! Our article is your ultimate guide to fixing the “Ps4 Controller X Button Not Working” issue. We’ve made it super simple, just for kids like you. Get ready to become a mini tech expert as we show you cool tricks to make that button spring back to life. Our step-by-step instructions are like game levels – easy to conquer! So, grab your controller and join the fun. Soon, you’ll be gaming like a pro again, all thanks to our kid-friendly tips. Say goodbye to button blues and hello to uninterrupted playtime!

Fixing The Ps4 Controller X Button Not Working

Make sure that you follow these 6 Steps so that you can find out what is the problem after that we will change the x button

Ps4 Controller X Button Not Working

1. Check for Physical Damage

The first step is to ensure that there is no physical damage around the X button on your PS4 controller. Sometimes, debris or dust particles can get stuck underneath the button, causing it to become unresponsive. Gently clean around the button using a soft, dry cloth to remove any potential obstacles.

2. Restart Your PS4 Console

A simple restart of your PS4 console can often solve minor software glitches that may be causing the X button issue. Press the power button on the front of your console and select “Restart.” Once the console reboots, check if the X button is functioning properly.

3. Check Controller Connection

Check Controller Connection

Make sure that your PS4 controller is properly connected to the console. If it’s a wired controller, ensure that the USB cable is securely plugged into both the controller and the console. If you’re using a wireless controller, connect it via the USB cable and press the PS button to sync it with the console.

4. Update the Controller Firmware

Sometimes, outdated firmware can lead to button responsiveness problems. Connect your controller to the PS4 console using a USB cable, then navigate to “Settings” > “Devices” > “Controllers” and select “Update Firmware.” Follow the on-screen instructions to update the controller firmware.

5. Reset the Controller

Reset the Controller

If none of the above steps work, you can try resetting the controller to its default settings. Look for the small reset button located on the back of the controller, near the L2 button. Use a paperclip or a similar object to press and hold the reset button for a few seconds. After releasing the button, reconnect the controller to the console and check if the X button is functioning.

6. Test on Another Game or Console

To rule out the possibility of a game-specific issue, try using the controller in a different game. If the X button works fine in other games, the problem might be related to the game you were initially playing. Additionally, if you have access to another PS4 console, test the controller on that console to see if the issue persists.

How to Change the PS4 Controller X Button

If you’re experiencing issues with the X button on your PS4 controller and you’ve tried all the troubleshooting steps without success, you might be considering replacing the button. While this task requires a bit of technical know-how, with the right tools and careful handling, you can get your controller back in working condition. Here’s a step-by-step guide on how to change the PS4 controller X button:

How to Change the PS4 Controller X Button

Materials You’ll Need:

  1. Replacement X button (available from online retailers or electronics stores)
  2. Phillips-head screwdriver
  3. Plastic prying tools or spudger
  4. Tweezers
  5. Small container or bag for screws

Step 1: Prepare Your Workspace

Before you begin, find a clean and well-lit workspace with enough room to lay out the controller and its components. Gather all the materials and tools you’ll need to avoid any interruptions during the process.

Step 2: Remove the Screws

Using the Phillips-head screwdriver, carefully remove the screws from the back of the PS4 controller. Make sure to keep track of each screw and consider using a small container or bag to organize them.

Step 3: Open the Controller

Open the Controller

Gently insert the plastic prying tools or spudger into the seams of the controller to carefully pop open the casing. Start from one corner and work your way around the controller, releasing the plastic clips that hold the two halves together. Be patient and avoid using excessive force to prevent damaging the casing.

Step 4: Access the Button Assembly

Once the controller is opened, you’ll have access to the internal components, including the button assembly. Locate the X button and the circuit board it’s attached to. Carefully disconnect any connectors or cables that are holding the button in place.

Step 5: Remove the Old X Button

Using the tweezers, gently lift and remove the old X button from its position on the circuit board. Take note of how the button is positioned and connected.

Step 6: Install the New X Button

Place the replacement X button in the same position as the old one. Ensure that it’s aligned correctly and fits snugly into place.

Step 7: Reassemble the Controller

Carefully reattach any connectors or cables that were disconnected earlier. Align the two halves of the controller casing and press them together to snap the plastic clips back into place.

Step 8: Secure the Screws

Using the Phillips-head screwdriver, reinsert and tighten all the screws you removed earlier. Make sure the casing is securely closed and the screws are properly fastened.

Step 9: Test the X Button

Before fully sealing the controller, turn on your PS4 console and test the functionality of the new X button. Ensure that it responds correctly and registers your inputs.

Step 10: Finish Sealing The Controller

If the X button is working as expected, go ahead and finish sealing the controller by pressing the two halves together. Give it a gentle press around the edges to ensure all the plastic clips are securely fastened.

Congratulations! You’ve successfully changed the X button on your PS4 controller. This is the Method To Fix Ps4 Controller X Button Not Working Remember, this process requires careful handling and attention to detail. If you’re not comfortable performing these steps yourself, it’s a good idea to seek assistance from a professional technician or consider reaching out to Sony’s customer support for further guidance.


Dealing with a non-responsive X button on your PS4 controller can be a minor setback in your gaming experience, but with a few troubleshooting steps, you can often resolve the issue. Remember to start with the simple solutions, like checking for physical obstructions and restarting your console, before moving on to more advanced steps like firmware updates and controller resets. If all else fails, you might need to consider reaching out to Sony’s customer support for further assistance. Happy gaming!


How can I determine if the X button issue is due to a loose connection?

A loose connection can often be identified by physical inspection. If the button feels wobbly or loose, it might be disconnected internally.

Can I fix the X button issue myself?

If you’re comfortable with electronics, you can attempt to fix the issue yourself. However, if you’re unsure, it’s advisable to seek professional assistance.

Why is button calibration important?

Button calibration ensures that your controller’s buttons are aligned and responsive. It can help resolve issues with unresponsive buttons.

Will updating the firmware erase my game data?

No, updating the firmware will not affect your game data. It only updates the controller’s internal software.

Can wireless interference affect other aspects of gaming?

Yes, wireless interference can lead to lag and connectivity issues, impacting your overall gaming experience.

What should I do if cleaning the button doesn’t work?

If cleaning doesn’t resolve the issue, you may need to replace the button or seek professional repair.

Leave a Comment